Description
Delfield F2936CP Description
The Delfield F2936CP refrigerated chef base has a stainless steel top that resists scratches and dents. With its full-perimeter marine edge, the unit contains leaks and spills to its top. For simple cleaning, the fully welded top corners have smooth finishes that can be wiped clean. Product is held within two drawers in 12-inch by 20-inch pans or smaller, fractional pans. This drawer system slides smoothly on Delrin® track rollers, without grease that must be replaced. The tracks and gaskets fit together tightly to keep the drawers closed.
Temperatures in the Delfield F2936CP chef base stay between 36 and 40 degrees Fahrenheit, and users can adjust the level by turning the knob in the machine compartment. Cold temperatures are created by R290 hydrocarbon refrigerant and retained with polyurethane foam insulation. Mullion blowers between the drawers move air throughout the interior, providing even cooling.
Product Details
- Heavy-duty top is made of stainless steel for corrosion resistance
- Marine edge keeps messes off the floor
- Fully welded corners on the top expedite cleaning
- 6-in. casters provide mobility for servicing and cleaning
- Wall-mounting bracket is included
- 1,064-BTU transfer capacity
- UL and cUL listed; NSF certified
Refrigerated Drawer Base
- 2 drawers each hold (2) 12-in. x 20-in. x 4-in. hotel pans (not included)
- Drawers are constructed of durable stainless steel
- Delrin® track rollers slide without grease smoothly
- Tracks secure to the gaskets, keeping the drawers shut on uneven floors
- Snap-in gasket has a removable design
- Recessed handles for smooth opening
- Chip- and dent-resistant, ABS plastic interior sides
- Interior back and bottom is constructed of rust-resistant stainless steel
Refrigeration System
- Eco-friendly R290 hydrocarbon refrigerant
- Retains cold temperatures with polyurethane foam insulation
- Temperature holding range: 36-40 degrees F
- Mullion blower coils between each drawer provide even airflow
- Machine compartment holds the electronic control, condensate evaporator, and condenser
- Dial thermometer is mounted in a protected enclosure
Dimensions & Utilities
- Top: 34.5 in. W x 29.19 in. D
- Overall: 36.25 in. W x 30.94 in. D x 24 in. H
- 2 A, 1.26 kW, 1⁄5 HP
- 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug
Refrigerated Low-Profile Equipment Stand, 36-1/4" W, single-section, (2) drawers (pans not included), stainless steel top & drawer fronts, front non-spill edge, ABS interior sides, casters, side-mounted refrigeration system with electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/5 hp, cUL, UL, NSF, 115v/60/1ph